Enhanced Entry Registration

Cost: $400

<< Back to Registration Options

Step 1 of 5
*Required Field

Contact Details

 

Please make a note of the email address and password you provide on this page as this will be used to enable you to login. Passwords must be at least 6 characters in length.

The following information will not be published.


Step 2 of 5
*Required Field

Company details

The following information will be published in the Filtration + Separation Buyers' Guide.

Step 3 of 5
*Required Field

Category details

Please select appropriate categories for entry using the list below.

  • .
    • Vacuum Bagging Materials
  • Additives and modifiers
    • Catalysts/promotors
      • Organic peroxides
    • Antioxidants
    • Antistatic agents
    • Colorants/pigments
    • Fire retardants
    • Foaming agents
    • Heat stablisers
    • Inhibitors
    • Low shrink, low profile additives
    • Nanomaterials
    • Other
    • Plasticisers
    • Release agents (in situ)
    • Sizings
    • Solvents
    • UV stabilisers
    • Viscosity control agents
  • Analytical equipment
    • Chemical testing
    • Mechanical testing
    • Non-destructive testing (NDT)
    • Other
  • Carbon fibre reinforcements
    • Carbon fibre
    • Multiaxial fabrics
    • Other
    • Woven fabrics
  • Core materials
    • Balsa wood
    • Honeycomb
    • Nonwoven core mat
    • Other
    • Paper
    • PEI foam
    • Phenolic
    • Polyurethane foam
    • PVC foam
  • Cutting/shaping/finishing equipment
    • Automated cutting systems - equipment
    • Automated cutting systems - software
    • CNC routers/trimmers
    • Laser cutting systems
    • Manual cutting systems
    • Materials handling/feeding equipment
    • Other
    • Waterjet cutting systems
  • Fabrication technique
    • Autoclave processing
    • Centrifugal casting
    • Compression moulding
    • Continuous laminating
    • Fibre placement
    • Filament winding
    • GMT stamping
    • Injection moulding
    • Other
    • Pultrusion
    • Resin transfer moulding (RTM)
    • Resin transfer moulding (RTM) Light
    • Resin/vacuum infusion
    • Spray-up
  • Fillers
    • Alumina trihydrate (ATH)
    • Calcium carbonate
    • Feldspar
    • Flake glass
    • Glass microspheres
    • Kaolin
    • Mica
    • Mica
    • Milled glass fibres
    • Other
    • Recycled material
    • Silica
    • Talc
    • Wollastonite
  • Gel-coats
    • Chemical/corrosion resistant
    • Fire retardant
    • General purpose
    • Marine/NPG
    • Other
    • Potable water
  • Glass fibre reinforcements
    • 3D space fabrics
    • Braided products
    • Chopped strand
    • Chopped strand for thermoplastics
    • Chopped strand mat (CSM)
    • Combined fabrics
    • Continuous filament mat (CFM)
    • Glass fibre
    • Multiaxial fabrics
    • Needled fabrics
    • Other
    • Roving
    • Woven fabric
  • Joining systems - adhesives
    • Epoxy
    • Methacrylate
    • Other
  • Moulding compounds
    • Bulk moulding compound (BMC)
    • Dough moulding compound (DMC)
    • Glass mat thermoplastics (GMT)
    • Low pressure moulding compound
    • Other
    • Sheet moulding compound (SMC)
  • Other reinforcements
    • Aramid fibre reinforcements
    • Basalt fibre reinforcements
    • Natural fibre reinforcements
    • Other reinforcements
  • Other thermosetting resins
    • Bisphenol
    • Epoxy
    • Hybrid
    • Other
    • Phenolic
    • Polyimide
    • Polyurethane
    • Vinyl ester
  • Prepregs
    • Carbon reinforced prepregs
    • Glass reinforced prepregs
    • Other
  • Processing equipment
    • Autoclaves
    • Centrifugal casting equipment
    • Cold presses
    • Fibre placement machinery
    • Filament winding equipment
    • GMT presses
    • GRP Processing Equipment
    • Hot presses
    • Knitting equipment
    • Laser positioning systems
    • Meter/mix dispensing equipment
    • Multiaxial knitting machines
    • Other
    • Ovens
    • Pultrusion machinery
    • Resin dispensing equipment
    • Robots
    • Safety equipment
    • Solvent recovery equipment
    • Spray-up equipment
    • Vacuum pumps
  • Products/semi--finished products
    • Aerospace
    • Automotive
    • Building/construction
    • Civil engineering/infrastructure
    • Consumer products
    • Corrosion-resistant equipment
    • Electrical/electronic
    • Marine/boat building
    • Medical
    • Military/defence
    • Offshore
    • Other
    • Rail/mass transit
    • Sports/leisure
    • Wind energy
  • Services
    • Consultants
    • Contract research
    • Design services
    • Educational institutions/universities
    • Environmental information services
    • Exhibition/conference organisers
    • Other
    • Publications/publishers
    • Recycling services
    • Repair services
    • Testing services
    • Trade associations
    • Training
  • Software
    • Design
    • Materials databases
    • Other
    • Simulation
  • Thermoplastic resins
    • Liquid crystal polymers
    • Other
    • Polyacetal
    • Polyamides
    • Polyarylates
    • Polycarbonate
    • Polyetherimide (PEI)
    • Polyethylene
    • Polyketones
    • Polyphenylenes (PPE, PPO, PPS)
    • Polypropylene (PP)
    • Polysulphones (PSU, PES)
    • Polyvinyl chloride (PVC)
    • Recycled thermoplastic resins
    • Styrenics (polystyrene, ABS, SMA)
    • Thermoplastic polyester (PBT, PET)
  • Tissues/surfacing veils
    • Glass
    • Other
    • Polyester
  • Tooling/moulds
    • Adhesive tape
    • Breather/bleeder fabrics
    • Metal moulds
    • Mould cleaners and sealers
    • Mould making services
    • Mould polishes
    • Mould release agents - solvent based
    • Mould release agents - water based
    • Pattern making materials
    • Pattern making services
    • Peel ply
    • Pressure-sensitive adhesive tape
    • Release films
    • Resin feed lines/tubing
    • Resin flow/distribution media
    • Sealant tapes
    • Spray adhesive (for positioning use)
    • Tooling blocks
    • Tooling gel-coats
    • Tooling paste
    • Tooling prepregs
    • Tooling resin
    • Vacuum bagging materials
    • Vacuum tubing
    • Valves and connectors
  • Unsaturated polyester resins
    • Chemical/corrosion resistant
    • Fire retardant
    • General purpose
    • Low styrene emission (LSE)
    • Other
    • SMC resins
  • .
  • Joining systems - fasteners
Step 4 of 5
*Required Field

Please select a payment method.

We can invoice you for payment or alternatively we can contact you by phone and you can pay via credit card. Please choose you method of payment by choosing one of the options listed below.

Step 5 of 5
*Required Field

Invoice details

Reinforced Plastics © Copyright 2008, Elsevier Ltd, All rights reserved.
Your use of this service is governed by Terms and Conditions.
Please review our Privacy Policy for details on how we protect information that you supply.
 Terms & Conditions | Privacy Policy